MikroTik RouterOS VPN Choosing The Right Protocol For Your Network

If you are looking for a reliable and secure way to connect two or more remote sites of your network, then setting up a site-to-site VPN is the perfect solution for you. This will allow you to have full access to resources on both ends of the network while securing your data from any unauthorised access. In this post, we will go through the process of configuring a site-to-site PPTP VPN server using Mikrotik Router, one of the most popular networking devices around.

Mikrotik RouterSite-to-Site PPTP VPN Server Configuration

What is PPTP VPN?

PPTP (Point-to-Point Tunneling Protocol) VPN is a method for implementing virtual private networking (VPN) using a VPN protocol that is widely supported across the Internet. It is one of the simplest VPN protocols to set up and is commonly used in networks where confidentiality is not a major concern, but where speed and simplicity are preferred over high security.

Step by Step Configuration of Site-to-Site PPTP VPN Server

Step 1: Setting up the Router

The major requirement for setting up a site-to-site PPTP VPN server using Mikrotik Router is having two remote sites or routers that are connected to the internet. To configure the site-to-site VPN server on your Mikrotik Router, perform the following steps:

Login to your Router OS web interface using any web browser by entering the IP address of the router in the address bar with the default HTTP port (80)
Enter your username and password to login to the Router OS.
Go to the IP tab and choose the Pool option, then add a new IP pool.
Enter the range of IP addresses that you want to use for your remote site.
Next, create a new PPP profile by going to the PPP section and selecting the Profiles tab.
Click the + button to add a new profile and then fill in the necessary details, including the local address pool and the remote address pool that you have previously created.

Step 2: Configuring PPTP Server on Mikrotik Router

After configuring the Router OS, the next step is to configure the PPTP server on your Mikrotik Router. To do this, follow the steps below:

Open the PPP tab and click on the PPTP Server option to create a new server profile.
In the new profile, change the Authentication option to MSCHAPv2 and click OK to save your settings.
Now create a new user by clicking on the + button under the Secrets tab.
Enter the username and password for the user and select the PPP profile that you created earlier.
Click OK to save your settings.

Step 3: Configuring PPTP Client on Remote Site Router

Once you have configured the Router OS and the PPTP server on Mikrotik Router, the next step is to configure the PPTP client on the remote site router. Follow these steps:

Go to the PPP tab and click on the PPTP Client option to create a new PPTP client.
In the new profile, configure the remote IP address for the Mikrotik Router to connect to.
Enter the username and password for the PPTP client and click Connect.

Step 4: Testing the PPTP Site-to-Site VPN Configuration

After setting up the PPTP site-to-site VPN, test the configuration by pinging the remote site from the other side. If the status is shown as connected, and the ICMP packets are being transmitted, then it means that the PPTP site-to-site VPN configuration has been successful.

Conclusion

The Mikrotik Router makes it easy to create a site-to-site VPN using PPTP. This method enables you to have the security and speed required to run your network efficiently. You will be able to connect remote sites with ease and secure your data from unauthorised access. Hopefully, this guide has been helpful in providing you with the information you need to set up your site-to-site PPTP VPN server using Mikrotik Router.