Authentication Methods For MikroTik Proxy Server

If you are looking to increase your online security and privacy, setting up proxy authentication with Mikrotik could be the solution you need. By creating a secure proxy server, you can block access to specific websites, monitor internet usage, and improve overall security. In this post, we will explain how to set up proxy authentication with Mikrotik, step-by-step.

Step 1: Configure IP Address

The first step is to configure the IP address of your Mikrotik router. This can be done via the terminal or the Winbox application. Once you have accessed the console, enter the following commands:

/ip address add address=192.168.88.1/24 network=192.168.88.0 broadcast=192.168.88.255 interface=ether1 

This will configure the IP address of your router. Make sure to replace 192.168.88.1/24 with the IP address of your router and ether1 with the name of the interface that connects to the internet.

Step 2: Create HTTP Proxy Server

The next step is to create the HTTP proxy server on your Mikrotik router. This can also be done via the terminal or the Winbox application. Enter the following commands:

/ip proxy set enabled=yes port=8080 

This will create the HTTP proxy server and enable it to listen on port 8080. You can change the port number if you wish.

Step 3: Configure Proxy Access

Now that the proxy server is set up, the next step is to configure access to it. Enter the following command:

/ip proxy access add src-address=192.168.88.0/24 action=allow 

This command allows access to the proxy server from any device on the 192.168.88.0/24 network. You can change this network address to match the IP range of your network.

Step 4: Configure Authentication

With access to the proxy server configured, the final step is to set up authentication for the server. Enter the following commands:

/ip proxy access add src-address=192.168.88.0/24 action=deny redirect-to="http://proxyloginpage.com" /ip hotspot user add name=user1 password=secret /ip proxy access add src-address=192.168.88.0/24 action=allow proxy-address=user1 

The first command denies access to the proxy server for anyone who is not authenticated. The redirect-to parameter specifies where users should be redirected if they are not authenticated. You should replace http://proxyloginpage.com with the URL of your own login page.

The second command creates a new user with the name user1 and the password secret. You can add additional users with the same command by changing the name and password parameters.

The final command allows access to the proxy server for authenticated users. The proxy-address parameter specifies the user who is allowed access. Replace user1 with the name of the user you created earlier.

Conclusion

By following these steps, you can create a secure proxy server with Mikrotik and improve your online security and privacy. With the ability to block access to specific websites and monitor internet usage, you can better protect your network from hackers and other online threats.

If you have any questions or issues with the setup process, feel free to reach out to technical support for assistance. With proper implementation and maintenance, you can enjoy the benefits of a secure and efficient online environment for you and those who depend on you.

mikrotik proxy server authentication set miranda connect im example using

authentication mikrotik proxy set hotspot ip login tried bindings bypass selected rule mac without ve use

server mikrotik proxy connection clients

linux server proxy prompt connect try if

Share :