Optimizing Network Efficiency With MikroTik Router Tips And Tricks

Are you looking to connect to a remote MikroTik VPN server? Look no further, as we have got you covered. In this article, we will guide you through the process of configuring your MikroTik VPN server with PPTP to connect to a remote client.

Step 1: Access the MikroTik Router

To start with the configuration process, you need to access your MikroTik router. You can do this by using an Ethernet cable or by connecting to the router's wireless network. Once connected, open your web browser and type the IP address of the router in the address bar. Enter your login credentials and click login to access the router's configuration page.

Step 2: Create a PPTP Server

The next step in setting up a MikroTik VPN server with PPTP is to create a PPTP server. To do this, follow the steps given below:

1. Go to the "PPP" tab in the router's configuration page.
2. Click on the "PPTP Server" button.
3. Enter a name for your PPTP server in the "Name" field.
4. Enter a range of IP addresses that the PPTP server can use to assign IP addresses to remote clients in the "Local address" field.
5. Click on the "OK" button to save your settings.

Step 3: Create a Firewall Rule

After creating a PPTP server, the next step is to create a firewall rule that allows PPTP traffic to pass through the router. To do this, follow the steps given below:

1. Go to the "IP" tab in the router's configuration page.
2. Click on the "Firewall" button.
3. Click on the "NAT" tab and then click on the "Add New" button.
4. Enter a name for your firewall rule in the "Chain" field.
5. Select "srcnat" in the "Chain" dropdown menu.
6. Select "pptp" in the "Protocol" dropdown menu.
7. Enter "1723" in the "DST Port" field.
8. Select the PPTP server you created in step 2 from the "To Address" dropdown menu.
9. Click on the "Action" dropdown menu and select "masquerade".
10. Click on the "OK" button to save your settings.

Step 4: Create PPTP User Account

Now it's time to create a user account that will be used to connect to the MikroTik VPN server. To do this, follow the steps given below:

1. Go to the "Secrets" tab in the router's configuration page.
2. Click on the "Add New" button.
3. Enter a name for your PPTP user in the "Name" field.
4. Enter a password for your user in the "Password" field.
5. Enter the IP address range that the user will be assigned when connecting to the VPN server in the "Remote address" field.
6. Click on the "OK" button to save your settings.

Step 5: Connect to the MikroTik VPN Server from a Remote Client

You are now ready to connect to the MikroTik VPN server from a remote client. Follow the steps given below:

1. Open the network settings on the remote client and click on the "VPN" icon.
2. Click on the "Add a VPN Connection" button.
3. Select "PPTP" as the VPN type.
4. Enter the IP address of the MikroTik router in the "Server Address" field.
5. Enter the username and password you created in step 4.
6. Click on the "Connect" button.

Congratulations! You have successfully setup a MikroTik VPN server with PPTP and connected to it from a remote client. If you face any issues during the configuration process, do not hesitate to contact MikroTik support for assistance.

Conclusion

Setting up a MikroTik VPN server with PPTP is a simple and effective way to connect to a remote client securely. By following the steps outlined in this article, you can easily setup your MikroTik VPN server and connect to it from a remote client. So, go ahead and try it out today!

mikrotik vpn configuration pptp client site router connecting remote server

mikrotik freeradius radius configuration router network

optimizing network

mikrotik router configuration winbox restrict systemzone

Share :