MikroTik RouterOS Firewall Advanced Threat Protection Techniques

Are you worried about protecting your network from external threats? One way to do that is by setting up a Public IP Firewall. In this MikroTik RouterOS tutorial, we will guide you through the process.

MikroTik RouterOS Tutorial - Public IP Firewall

What is a Public IP Firewall?

A Public IP Firewall is a security feature that helps to protect your network from external threats. It acts as a barrier between your internal network and the outside world. The firewall filters incoming and outgoing traffic based on predefined rules, allowing only authorized traffic to pass through.

Why do you need a Public IP Firewall?

If you are using a public IP address for your network, you are vulnerable to external threats such as hacking, phishing, and malware attacks. Without a firewall, these threats can easily penetrate your network and cause damage. A Public IP Firewall acts as a first line of defense, blocking unauthorized access attempts and keeping your network safe.

How does a Public IP Firewall work?

A Public IP Firewall works by examining incoming and outgoing traffic and applying rules to it. The rules determine whether the traffic is allowed to pass through or not. The rules can be based on various parameters such as IP addresses, ports, protocols, and packet content.

How to set up a Public IP Firewall in MikroTik RouterOS?

Setting up a Public IP Firewall in MikroTik RouterOS is easy. Follow these steps:

Step 1: Assign a public IP address to your router

Make sure your router has a public IP address assigned to it. You can get a public IP address from your Internet Service Provider (ISP).

Step 2: Configure firewall rules

Configure firewall rules to allow or block traffic based on your requirements. Here are some examples of firewall rules:

Block all incoming traffic except for specific ports such as HTTP, HTTPS, and SSH.
Block all outgoing traffic except for specific ports such as SMTP and DNS.
Block traffic from specific IP addresses or IP address ranges.
Allow traffic from specific IP addresses or IP address ranges.

How to configure firewall rules in MikroTik RouterOS?

To configure firewall rules in MikroTik RouterOS, follow these steps:

Read also

Open the WinBox application.
Connect to your MikroTik router.
Click on the "IP" menu on the left-hand side of the screen.
Click on "Firewall".
Click on the "Filter Rules" tab.
Click on the "+" button to add a new rule.
Configure the rule according to your requirements.
Click on "Apply" to save the changes.

Step 3: Test the firewall

Test the firewall to ensure that it is working as expected. You can use various tools such as port scanners and packet sniffers to test the firewall.

Conclusion

Setting up a Public IP Firewall is an essential step in securing your network from external threats. By following the steps outlined in this tutorial, you can configure a Public IP Firewall in your MikroTik RouterOS easily. Remember to test the firewall to ensure that it is working as expected.

Stay safe and secure!