Implementing MikroTik RouterOS Firewall Essential Rules And Filters

Are you struggling to configure PPPoE with FPT, VNPT, or Viettel? Don't fret, we've got you covered! In this guide, we'll walk you through the process step-by-step, whether or not you're using VLAN 35.

What is PPPoE?

PPPoE, or Point-to-Point Protocol over Ethernet, is a network protocol used commonly by Internet service providers to manage their broadband Internet access. Essentially, PPPoE enables a broadband connection to be initiated and authenticated by a username and password, thus providing an extra layer of security and control over the connection. Many ISPs in Vietnam, such as FPT, VNPT, and Viettel, use PPPoE for their broadband services.

Configuring PPPoE with FPT, VNPT, or Viettel

To configure PPPoE with FPT, VNPT, or Viettel, you will need to follow these steps:

1. Open the Network and Sharing Center on your computer.
2. Select the option to Set up a new connection or network.
3. Choose the option to Connect to the Internet.
4. Select the option to Broadband (PPPoE).
5. Enter your username and password provided by your ISP.
6. Complete any other relevant information requested by your ISP, such as VLAN ID or MTU size.
7. Save your settings, and you should be connected to the Internet.

Configuring PPPoE with VLAN 35

If you are using VLAN 35 with your PPPoE connection, you will need to follow some additional steps:

1. Open the Network and Sharing Center on your computer.
2. Select the option to Set up a new connection or network.
3. Choose the option to Connect to the Internet.
4. Select the option to Broadband (PPPoE).
5. Enter your username and password provided by your ISP.
6. Click the option to Set up my connection manually.
7. Enter the following details:
   • Network Connections Name: Any preferred name
   • Username: Your PPPoE username
   • Password: Your PPPoE password
   • VLAN ID: 35
8. Click Connect, and you should be connected to the Internet.

Troubleshooting PPPoE Connection Issues

If you are experiencing issues with your PPPoE connection, there are some steps you can take to troubleshoot the problem:

1. Check that your username and password are correct.
2. Verify that your router or modem is properly configured for PPPoE.
3. Ensure that your Ethernet cable is properly connected to your device and your modem or router.
4. Contact your ISP for further assistance.

Conclusion

In summary, configuring PPPoE with FPT, VNPT, or Viettel is a simple process that can be completed by following the steps outlined in this guide. Additionally, if you are using VLAN 35, there are some additional steps you will need to take. If you encounter any issues, be sure to check your username and password, verify your router or modem configuration, ensure your Ethernet cable is properly connected, and reach out to your ISP for further assistance if necessary. With these steps, you'll be able to enjoy a stable and secure PPPoE connection with ease.

Share :