Setting Up Site-to-Site VPN With MikroTik Routers A Comprehensive Guide

Have you ever wanted to establish a secure site-to-site VPN between two Mikrotik routers? Look no further! We’ve got you covered with our easy-to-follow guide.

What is a site-to-site VPN?

A site-to-site VPN allows you to connect two remote sites securely over the internet, effectively creating a private network between them. This is useful for businesses with multiple locations, as it allows employees to access resources and data from any location while maintaining a high level of security.

Why use Mikrotik routers?

Mikrotik routers are a popular choice for site-to-site VPNs due to their advanced networking capabilities and affordability. They offer a wide range of features and can be easily configured for a variety of applications.

Setting up the site-to-site VPN

Step 1: Configure the IP addresses

The first step is to configure the IP addresses of both routers. This involves assigning a unique IP address to each router, as well as setting the subnet mask and default gateway.

Router 1:

     /ip address     add address=192.168.1.1/24 interface=ether1     /ip route     add distance=1 gateway=192.168.1.2 

Router 2:

     /ip address     add address=192.168.1.2/24 interface=ether1     /ip route     add distance=1 gateway=192.168.1.1 

Step 2: Configure the IPSec settings

The next step is to configure the IPSec settings on both routers. This involves configuring the authentication method, encryption algorithm, and other security settings.

Router 1:

     /ip ipsec proposal     set [ find default=yes ] enc-algorithms=aes-128-cbc     /ip ipsec peer     add address=10.0.0.2/32 auth-method=pre-shared-key secret=mysecret1 enc-algorithm=aes-128-cbc 

Router 2:

     /ip ipsec proposal     set [ find default=yes ] enc-algorithms=aes-128-cbc     /ip ipsec peer     add address=10.0.0.1/32 auth-method=pre-shared-key secret=mysecret1 enc-algorithm=aes-128-cbc 

Step 3: Configure the IKE settings

The final step is to configure the IKE settings on both routers. This involves setting the authentication method, encryption algorithm, and other security settings.

Router 1:

     /ip ipsec policy     add action=encrypt comment="encrypt traffic from local to remote subnet" dst-address=10.0.0.0/24 dst-port=any proposal=default sa-dst-address=10.0.0.2 src-address=10.0.0.1     /ip ipsec identity     add auth-method=pre-shared-key secret=mysecret1 username=router1 

Router 2:

     /ip ipsec policy     add action=encrypt comment="encrypt traffic from local to remote subnet" dst-address=192.168.1.0/24 dst-port=any proposal=default sa-dst-address=192.168.1.1 src-address=192.168.1.2     /ip ipsec identity     add auth-method=pre-shared-key secret=mysecret1 username=router2 

Conclusion

Setting up a site-to-site VPN between Mikrotik routers is a relatively simple process that can greatly improve your network security and flexibility. By following the steps outlined in this guide, you can create a private network between two remote sites that is both secure and reliable.

So, what are you waiting for? Get started today and take your network to the next level!

ipsec openvpn mikrotik vpn eoip ipip routeros gre client nordvpn routers configure ikev2 howto konfiguracja navigazione anonima systemzone elektroda blogamico

vpn ipsec mikrotik router site tunnel dhcp address configuration side ip fig gif

mikrotik routers establish vpn

mikrotik routers establish vpn

Share :