Skip to content Skip to sidebar Skip to footer

Setting Up Site-to-Site VPN On MikroTik Routers

If you're looking to secure your internet connection, a VPN is a great option. With a VPN, your internet traffic is encrypted, protecting you from hackers and malware. But configuring a VPN can be tricky. In this article, we'll show you how to set up a VPN with a MikroTik router.

MikroTik router

Step 1: Set up the PPTP server

The first step in setting up a VPN with a MikroTik router is to set up a PPTP (Point-to-Point Tunneling Protocol) server. To do this, follow these steps:

  • Log in to your MikroTik router
  • Click on PPP from the main menu
  • Click on PPTP Server
  • Check the box next to Enabled
  • Enter a name for the server in the Service Name field
  • In the IP Address field, enter the IP address of the router's WAN (wide area network) interface
  • Enter the username and password you want to use for the VPN in the User and Password fields
  • Click on Apply and OK to save the changes

Step 2: Set up the PPTP client

Once you've set up the PPTP server, the next step is to set up a PPTP client. This will be the device you'll be using to connect to the VPN. To do this, follow these steps:

  • Open the VPN client software on your device
  • Enter the WAN IP address of your router in the Server field
  • Enter the username and password you set up earlier in the User and Password fields
  • Click Connect

Step 3: Configure the firewall

Before your PPTP VPN will work, you'll need to configure the firewall on your MikroTik router to allow traffic through. To do this, follow these steps:

  • Click on IP from the main menu
  • Click on Firewall
  • Click on the Rules tab
  • Click on the Add New button
  • In the General tab, enter a name for the rule in the Name field
  • Make sure the chain is set to input
  • In the TCP protocol field, enter 1723
  • In the Action tab, make sure Accept is selected
  • Click on Apply and OK to save the changes

Step 4: Test the VPN

With the PPTP server, client, and firewall rules set up, it's time to test the VPN. To do this, follow these steps:

  • Connect to the VPN using the client software on your device
  • Open a web browser and go to a site like www.whatismyip.com
  • Verify that your IP address matches the WAN IP address of your router

If everything is working correctly, you should now be connected to the VPN and have a secure internet connection.

Conclusion

Setting up a VPN with a MikroTik router can be a bit technical, but with the right guidance, it's not too difficult. By following the steps outlined in this article, you should be able to set up a VPN and enjoy the peace of mind that comes with a secure internet connection.

MikroTik VPN Configuration with Site-to-Site PPTP - System Zone
pptp site vpn mikrotik configuration


VPN Configuration with MikroTik Router | skynet computer amit
mikrotik vpn


Setting up a L2TP VPN on a MikroTik Router – Natural Born Coder
mikrotik vpn


MikroTik Site to Site EoIP Tunnel with IPsec - System Zone
ipsec openvpn mikrotik vpn eoip ipip routeros gre routers ikev2 configure client nordvpn howto konfiguracja navigazione anonima systemzone elektroda blogamico



Post a Comment for "Setting Up Site-to-Site VPN On MikroTik Routers"