Securing MikroTik RouterOS With IPSec VPN

Hey there, fellow tech enthusiasts! I stumbled upon something mind-blowing today that I just have to share with you all. It's all about creating an IPsec VPN between a Mikrotik router and a Vigor Router. I mean, can we all just take a moment to appreciate how amazing technology is?

So, let me break it down for you. Here's how you can create an IPsec VPN between these two routers:

Step One: Configuring the Mikrotik Router

• Login to your Mikrotik router using Winbox or the web interface
• Click on "IP" from the menu, then on "IPsec"
• Click on the "Policies" tab and then "Add"
• Enter the following information:
  • Name: Mikrotik-to-Vigor
  • Src. Address: The IP address of your Mikrotik router
  • Dst. Address: The IP address of your Vigor router
  • Protocol: Any
  • Action: Encrypt
  • Level: Unique
  • IPsec Encryption: 3DES
  • IPsec Authentication: md5
  • PFS Group: Group2
  • Proposal Check: obey
• Click "OK" to save the policy
• Click on the "Peers" tab and then "Add"
• Enter the following information:
  • Name: Mikrotik-to-Vigor
  • Address: The IP address of your Vigor router
  • Auth. Method: Pre-Shared Key
  • Secret: Enter a secure pre-shared key
  • Exchange Mode: Aggressive
  • Nat Traversal: Yes
  • My Identifier: Address
  • Proposal Check: obey
  • Proposal:
    • Encryption Algorithm: 3DES
    • Authentication Algorithm: md5
• Click "OK" to save the peer

Step Two: Configuring the Vigor Router

• Login to your Vigor router using the web interface
• Click on "VPN" from the menu, then on "IPsec"
• Click "Add" to create a new profile
• Enter the following information:
  • Name: Vigor-to-Mikrotik
  • Preshared Key: Enter the same secret key you used in Step One
  • Remote IPSec Device: The IP address of your Mikrotik router
  • Local Network: The IP address and subnet mask of your local network
  • Remote Network: The IP address and subnet mask of the remote network (the network behind the Mikrotik router)
  • Encryption: 3DES
  • Authentication: MD5
  • Key Group: DH Group2
  • Mode: Aggressive
  • NAT Traversal: Enable
  • DPD: Enable
  • DPD Interval: 10
• Click "OK" to save the profile

That's it! You've successfully created an IPsec VPN between your Mikrotik and Vigor routers. Now you can securely and easily access resources on the remote network. Isn't technology amazing?

Remember, always keep your network secure and up-to-date. Happy routing!

vpn mikrotik l2tp ipsec routeros mengubah mengkonfigurasi ppp labkom pengguna

vpn ipsec mikrotik router setup draytek vigor routeros v6 between before

tunnel ipsec openvpn mikrotik vpn eoip ipip configuration routeros server gre routers ikev2 configure nordvpn howto konfiguracja navigazione anonima systemzone

Share :