Multi-WAN Failover Configuration With MikroTik Routers
Load balancing has become an essential feature for networking devices such as routers to make sure that traffic is distributed among multiple connections, ensuring performance optimization. One device that is commonly used for load balancing is the MikroTik router.
In this article, we will explain in detail how you can configure MikroTik Load Balancing with 2 PPPoE and 1 Static WAN using ECMP. This will guide you on how to set up two PPPoE connections, one static WAN connection, and load balance through all these connections simultaneously.
Configuration Steps
To configure the MikroTik router for load balancing, follow these steps:
Step 1: Add PPPoE Client Connections
The first step is to add two PPPoE client connections. Here's how:
1. Launch the Winbox tool and connect to your MikroTik router.
2. Navigate to the "Interfaces" menu and click on the "+" icon to add a new interface.
3. Select the "PPPoE Client" option from the list. Under "General," specify the interface name and click "Apply."
4. Go to the "PPPoE" tab and enter the login credentials for the PPPoE connection provided by your internet service provider (ISP).
5. Repeat the steps above to add another PPPoE client interface and enter the login credentials for the second connection provided by your ISP.
Step 2: Add Static WAN Connection
The next step is to add a static WAN connection. Here's how:
1. Navigate to the "Interfaces" menu and click on the "+" icon to add a new interface.
2. Select "Ether" as the connection type and enter the appropriate values for "Name," "MAC address," and other parameters under "General."
3. Go to the "IP" tab and specify the IP address, netmask, and gateway values provided by your ISP.
Step 3: Configure Load Balancing
Now that all the connections are set up, it is time to configure load balancing. Here's how you can do it:
1. Navigate to the "IP" menu and click on "Routes."
2. Click on the "+" icon to add a new route. Under "General," specify the "Destination" as "0.0.0.0/0" and select all the interfaces.
3. Go to the "Action" tab and select "ECMP" as the routing method.
4. Under "ECMP," click on "+" to add all the interfaces. You can assign different weights to each interface based on the bandwidth provided by your ISP.
5. Specify the "Gateway" as the static WAN connection that you added in Step 2.
6. Click "Apply" to save the configuration.
Testing Load Balancing Configuration
Now that you have configured load balancing on your MikroTik router, you can test the configuration to ensure that the traffic is distributed among all the connections evenly. Here's how you can do it:
1. Connect a device to the router's LAN port and access the internet.
2. Perform a speed test to measure the download and upload speeds.
3. Disconnect one of the PPPoE connections and perform another speed test.
4. Repeat the above steps for the second PPPoE connection.
5. The average download and upload speeds should be the same for all the tests. This indicates that the load balancing configuration is working correctly.
Conclusion
Load balancing is an important feature for networking devices such as routers to optimize performance and ensure that the traffic is distributed evenly. The MikroTik router can be configured for load balancing by setting up two PPPoE connections, one static WAN connection, and load balancing through all these connections simultaneously.
We hope this article has been informative and has helped you understand how to configure MikroTik Load Balancing with 2 PPPoE and 1 Static WAN using ECMP.
Post a Comment for "Multi-WAN Failover Configuration With MikroTik Routers"