Advanced MikroTik RouterOS VPN Configuring GRE And MPLS Tunnels

If you are a farmer and in need of a secure way to connect your Mikrotik(RouterOS v6.47) and Vigor Router, then you are in the right place. We have put together a detailed guide on how to set up an IPsec VPN between your Mikrotik and Vigor Router.

What is an IPsec VPN?

Before we dive into the set up process, let's first define what an IPsec VPN is. IPsec stands for Internet Protocol Security and is a protocol used to secure internet communication. When two devices are connected via an IPsec VPN, all data sent between them is encrypted and authenticated, ensuring that no one can intercept or modify the data.

Step-by-step guide to set up an IPsec VPN between Mikrotik and Vigor Router

Now that we know what an IPsec VPN is, let's get started with the set up process:

Step 1: Configure the Vigor Router

1. Log in to your Vigor Router
2. Go to VPN and Remote Access
3. Click on IPsec
4. Select the IKEv1 tab
5. Enable the IKEv1 functionality
6. Enter a pre-shared key
7. Select the encryption and authentication algorithms you want to use
8. Click on OK to save the settings
9. Click on General Setup and make note of the WAN IP address

Step 2: Configure the Mikrotik Router

1. Log in to your Mikrotik Router
2. Go to IP
3. Click on IPsec
4. Click on the Peers tab
5. Click on the + button to add a new peer
6. Enter the Vigor Router's WAN IP address as the remote address
7. Enter the pre-shared key you set up on the Vigor Router
8. Select the encryption and authentication algorithms you want to use
9. Click on the Proposal tab
10. Add a new proposal using the same encryption and authentication algorithms you selected earlier
11. Click on OK to save the settings
12. Click on the Policies tab
13. Add a new policy
14. Select the proposal you just created
15. Select the IP address of the local network you want to connect to the Vigor Router
16. Select the IP address of the remote network on the Vigor Router
17. Click on the Action tab
18. Select tunnel as the Action
19. Click on OK to save the settings
20. Click on the Mode Config tab
21. Select enable mode config
22. Enter the IP addresses of the DNS servers you want to use
23. Enter the IP address of the local network
24. Enter the subnet mask for the local network
25. Click on OK to save the settings

Step 3: Test the connection

1. Go to the Vigor Router
2. Click on VPN and Remote Access
3. Click on IPsec Connection Status
4. You should see a new connection with the Mikrotik Router
5. Log in to a device on the local network connected to the Mikrotik Router
6. Try to ping a device on the local network connected to the Vigor Router
7. If the ping is successful, the IPsec VPN connection is working

Conclusion

Setting up an IPsec VPN between your Mikrotik and Vigor Router is a great way to ensure secure communication between devices. By following these steps, you should be able to set up the IPsec VPN connection in no time.

Remember to make note of the pre-shared key and the WAN IP address of the Vigor Router, as these will be required during the set up process. If you run into any issues, feel free to refer to the user manuals of your Mikrotik and Vigor Router or contact the support teams for further assistance.

Stay secure, and happy farming!

vpn ipsec mikrotik router setup draytek vigor v6 routeros between before

Share :