The Benefits Of Using MikroTik Routers In Small Businesses

Hey there! If you're interested in setting up your own PPTP VPN server using a MikroTik Router, you're in the right place! In this post, we'll walk you through the steps needed to get your VPN server up and running. We've included a helpful image to guide you along the way, so let's dive in!

Before we begin, it's important to understand what a VPN server is and why you might want to set one up. A VPN, or Virtual Private Network, allows you to create a secure connection to another network over the internet. This can be useful for a variety of reasons, such as accessing content that is restricted in your area, or keeping your internet activity private.

Now, on to setting up your PPTP VPN server using a MikroTik Router! Here are the steps:

Step 1: Log in to your MikroTik Router

The first step is to log in to your router. You can do this by opening your web browser and entering the IP address of your router in the address bar. Once you've entered the IP address, you will be prompted to enter your username and password.

Step 2: Configure the PPTP Server

Once you've logged in to your router, navigate to the PPTP Server configuration page. Here, you will need to enable the PPTP Server and configure the settings according to your preferences. You can choose which IP address range to assign to VPN clients, as well as set up authentication and encryption settings. Once you've configured the settings, save and apply them.

Step 3: Create VPN Users

Now that you've configured the PPTP Server, it's time to create VPN users. Navigate to the PPP Users page and create a new user. You will need to enter a username, password, and assign an IP address to the user. Once you've created the user, save and apply the settings.

Step 4: Configure Firewall Rules

Next, you'll need to configure firewall rules to allow VPN traffic to pass through your router. Navigate to the Firewall Filter Rules page and create a new rule that allows traffic from the PPTP interface to pass through. You can also add other rules to restrict access to certain resources if desired.

Step 5: Test the VPN Connection

Now that you've completed the setup process, it's time to test your VPN connection. You can do this by connecting to the VPN using the username and password you created earlier. Once connected, you should be able to access resources on your network as if you were physically connected to it.

And that's it! By following these simple steps, you should now have a fully functional PPTP VPN server using a MikroTik Router. Remember to keep your router firmware up to date and to follow best practices when it comes to securing your network.

If you have any questions or run into any issues, feel free to consult the documentation provided by MikroTik or seek help from their support team. Good luck and happy VPN-ing!