Configuring MikroTik Router As An Effective Proxy Server

Yo, Mikrotik gang! Let me hit y'all with some knowledge on how to make your NTP server and client configuration easy peasy lemon squeezy.

First things first, let's talk about what NTP is. NTP stands for Network Time Protocol, and it's what keeps all the devices on your network synchronized to the same time. This is important, because without proper time synchronization, your network could experience all sorts of issues.

Now, let's get down to the nitty gritty of configuring NTP on Mikrotik. Here are the steps:

Step 1: Setting up the NTP server

Before you can configure your NTP client, you need to have an NTP server that you can sync to. Luckily, setting up an NTP server on Mikrotik is pretty straightforward.

Open up the Winbox application on your computer and connect to your Mikrotik router.
Click on the "IP" menu on the left-hand side of the screen, and then click "NTP".
Click the "Settings" tab at the top of the screen.
Under the "Servers" section, click the "+" button to add a new NTP server.
Enter the IP address of the NTP server you want to sync to (you can find a list of NTP servers on the internet).
Click "OK".

That's it! Your Mikrotik router is now configured to sync to the NTP server you specified.

Step 2: Setting up the NTP client

Now that you have your NTP server set up, it's time to configure your NTP client to sync to it.

Click on the "System" menu on the left-hand side of the screen, and then click "NTP Client".
In the "Servers" section, click the "+" button to add a new NTP server.
Enter the IP address of your NTP server (the same IP address you entered in Step 1).
Under the "Mode" dropdown menu, select "unicast".
Click "OK".

And voila! Your Mikrotik router is now configured to sync to your NTP server.

Step 3: Verifying your NTP configuration

Once you've configured your NTP server and client, it's always a good idea to verify that everything is working as expected. Here's how:

Go back to the "NTP" menu under the "IP" menu on the left-hand side of the screen.
Click the "Leap Status" tab at the top of the screen.

You should see a table that shows the synchronization status of your NTP server and client. If everything is working properly, the status should say something like "synchronized". If not, you may need to troubleshoot your configuration or try a different NTP server.

Conclusion

And that's it! Configuring NTP on Mikrotik is pretty simple, as long as you know what you're doing. By following these steps, you should have no problem setting up your NTP server and client, and keeping your network running smoothly.

If you're having trouble with your NTP configuration, don't hesitate to contact Mikrotik support or consult the Mikrotik forums. There's a wealth of information out there, and someone is bound to have had a similar issue and be able to help you out.

Happy syncing, y'all!

Read also