Building A Secure VPN Network With MikroTik Routers Tips And Tricks

MikroTik is one of the best routers in the networking industry, which gained its popularity due to its outstanding performance, security, and excellent configuration capabilities. If you are looking to set up your VPN using MikroTik, then you are at the right place. In this post, we will guide you through the step-by-step configuration of MikroTik VPN using PPTP.

What is MikroTik VPN?

A VPN (Virtual Private Network) is a type of network that enhances your privacy. It is a secure way to connect your device to the internet, and it provides you with a private network that is protected from unwanted people. The MikroTik VPN is a virtual private network that is used to enhance your network security and privacy.

How to Configuration MikroTik VPN with PPTP?

The following are the steps on how to configure MikroTik VPN with PPTP:

Step One

The first step is to access your MikroTik router. To do this, open your web browser and enter the IP address of your router in the address bar. You will need to enter your administrator username and password to log in.

Step Two

After logging in, click on the 'PPP' option from the menu on the left-hand side of the screen. Then, click on the 'PPP Profiles' option and select the 'PPTP' protocol.

Step Three

Next, click on the 'Add New' button and enter a name for your new profile. Then, set the 'Local Address' to the IP address of your MikroTik router.

Step Four

After setting the 'Local Address,' set the 'Remote Address' to the IP address range that will be used by the clients who will connect to the MikroTik VPN. Set the 'Use Pool' option to 'Yes' and enter a range of IP addresses for the VPN clients.

Step Five

You can add a comment if you want to describe your PPP profile configuration in simpler terms. Then, click on the 'OK' button to save your new profile.

Step Six

The next step is to add new users to your VPN. Go to the 'PPP' option from the left-hand side menu and click on 'Secrets.'

Step Seven

Then, click on the 'Add New' button to create a new user. Set the 'Name' to the username you want to use for your VPN and set the 'Password.' Check the 'Profile' option and select the profile you just created.

Step Eight

Set the 'Remote Address' to the MikroTik router's IP address and click on the 'OK' button to save your new user.

Step Nine

The next step is to configure the firewall on your MikroTik router to allow the traffic from VPN clients. Go to the 'IP' option from the left-hand side menu and click on 'Firewall.'

Step Ten

Click on the 'Filter Rules' option and add the following rule to the top of the list: action=accept chain=input dst-address-type=local in-interface=ether1 protocol=tcp src-port=1723.

Step Eleven

Then, add the following rule to the top of the list: action=accept chain=input dst-address-type=local in-interface=ether1 protocol=gre. Click on the 'OK' button to save the configuration.

Read also

Step Twelve

The final step is to create a new PPTP client on your device and enter the MikroTik router's public IP address, username, and password.

Conclusion

Configuring MikroTik VPN with PPTP is a simple and effective way to protect your network from unwanted access and ensure your online security. By following the above-mentioned steps, you can easily set up your VPN and enjoy a secure and private network connection. Happy browsing!