MikroTik Router Configuration Proxy Server Redundancy
Do you want to enhance the security and privacy of your network? One excellent solution to achieve that is by setting up a Site-to-Site PPTP VPN using your Mikrotik router! This configuration might sound a bit daunting at first, but worry not, we'll guide you through it step-by-step, so you can get started in no time.
What is a Site-to-Site VPN?
A Site-to-Site VPN, as the name suggests, connects two or more local networks securely over the internet, allowing them to communicate and share resources as if they were part of the same private network. It's an excellent way to connect multiple locations, such as branch offices, and keep your data safe from prying eyes.
Why Use PPTP for Site-to-Site VPN?
PPTP or Point-to-Point Tunneling Protocol is an old but still widely used VPN protocol due to its ease of setup, simplicity, and compatibility with most operating systems and devices. Although it's not the most secure protocol, it can still provide adequate protection as long as you use a strong encryption method and enforce strict authentication policies.
How to Set Up Mikrotik RouterSite-to-Site PPTP VPN Server?
Now that you have a better understanding of what a Site-to-Site PPTP VPN is, let's dive into the details of how you can set it up on your Mikrotik router:
Step 1: Configure IP addresses and DNS settings
The first step is to set up the IP addresses of your router interface and the DNS settings. You can do this by navigating to IP > Addresses and IP > DNS respectively. Make sure to assign static IP addresses to both endpoints of the VPN connection, so they don't change over time.
Step 2: Set up PPTP Server
Next, you need to configure the PPTP server on your Mikrotik router, which will handle the VPN connections from the remote locations. To do this, navigate to PPP > PPTP Server and click on the plus (+) icon to add a new server. You'll need to set up parameters, such as the external interface, authentication, encryption, and MTU.
Step 3: Create PPTP client profiles
Now that you have set up the PPTP server, you can create PPTP client profiles for each remote location to connect to the server. You can do this by navigating to PPP > PPTP Client and clicking on the plus (+) icon to add a new profile. You'll need to configure parameters, such as the server IP address, username, password, and encryption.
Step 4: Add firewall rules
Once you have set up the PPTP server and client profiles, you need to add firewall rules to allow the VPN traffic to pass through. You can do this by navigating to IP > Firewall and adding new rules to allow inbound and outbound traffic on the PPTP interface.
Step 5: Test the Site-to-Site VPN connection
The final step is to test the Site-to-Site VPN connection by attempting to ping a device on the remote network from one of the local machines. If the ping is successful, then you have successfully set up the Site-to-Site VPN connection!
Conclusion
Setting up a Site-to-Site PPTP VPN using your Mikrotik router is not as challenging as it might seem, as long as you follow the steps outlined above. By doing so, you'll be able to create a secure and private network that spans across multiple locations, enabling easy communication and resource sharing. So, why not give it a try today and see how it can benefit your organization?
Post a Comment for "MikroTik Router Configuration Proxy Server Redundancy"