Skip to content Skip to sidebar Skip to footer

Mastering MikroTik Router Configuration Tips And Tricks

Today we will walk you through the basic configuration steps for your Mikrotik router using the Winbox interface. With its user-friendly interface, Winbox allows enterprise networks and individuals alike to easily configure and manage their network infrastructure.

Mikrotik Router Configuration Steps

Step 1: Connect to Your Router

The first step in configuring your Mikrotik router is connecting to it using the Winbox interface. To do this, open the Winbox application and click on the “Neighbors” tab. Here you will see a list of all of the Mikrotik devices on your network. Click on the one you want to configure and click “Connect”.

Step 2: Set Up Your Internet Connection

Once you are connected to your Mikrotik router, the next step is to configure your internet connection. To do this, click on the “IP” tab on the left-hand side of the page, then click on “DHCP Client”. Here you will add your internet provider’s DNS address in the “DNS servers” section, and click “Apply”.

Step 3: Create a New Bridge

The next step in configuring your Mikrotik router is to create a new bridge. This will allow for all of the devices on your network to communicate with one another. To do this, click on the “Bridge” tab on the left-hand side of the page, then click on “Add New”. Here you will give your bridge a name and select the network interface you want to bridge. Once complete, click “Apply”.

Step 4: Set Up Your Wireless Access Point

If you want to enable wireless access for your devices, the next step is to configure your wireless access point. To do this, click on the “Wireless” tab on the left-hand side of the page, then click on the “Security Profiles” tab. Here you will create a new wireless security profile, setting your wireless password and encryption settings. Next, click on the “Wireless” tab again, then click on “Access Points”. Here you will create a new access point, selecting the SSID (name of your wireless network) and the wireless security profile you just created.

Step 5: Configure Your Firewall Rules

The next step is to configure your firewall rules, which will determine what traffic is allowed in and out of your network. To do this, click on the “IP” tab on the left-hand side of the page, then click on “Firewall”. Here you will create a new firewall rule, setting the action, protocol, and source/destination IP addresses. Once completed, click “Apply”.

Step 6: Configure Your DHCP Server

The final step in configuring your Mikrotik router is to set up your DHCP server. This will allow your devices to automatically receive network settings when they connect to your network. To do this, click on the “IP” tab on the left-hand side of the page, then click on “DHCP Server”. Here you will enable the DHCP server and configure the IP address range, DNS servers, and other network settings.

Congratulations! You have successfully configured your Mikrotik router using the Winbox interface. Remember to save your changes by clicking “Apply” before closing the application. If you encounter any issues during the configuration process, please refer to the Mikrotik documentation or contact their support team for assistance.

Mikrotik Cloud Core Router (CCR) Setup and Configuration First Time
mikrotik router configuration ccr pppoe


MikroTik Router Configuration Graphically – System Zone
mikrotik router configuration graphically


How to configure a Mikrotik router step by step
mikrotik configure gateway


How to mikrotik router basic configuration step by step using Winbox
router basic mikrotik using part winbox configuration step backdoor dhaka



Post a Comment for "Mastering MikroTik Router Configuration Tips And Tricks"