Configuring MikroTik Router For Site-to-Site VPN
Have you ever wanted to connect two remote locations seamlessly, as if they are on the same local network? Look no further. With Site-to-Site SSTP VPN configuration between two MikroTik RouterOS, you can establish a secure network connection between two locations with ease.
Here are some of the key benefits of using Site-to-Site SSTP VPN:
- Secure Connection: Site-to-Site SSTP VPN provides a secure and encrypted tunnel between the two locations, allowing you to transmit sensitive data without worrying about interception.
- Cost-effective: Site-to-Site SSTP VPN eliminates the need for expensive leased lines or physical connections between the two locations, thus reducing the cost of connection.
- Flexible: Site-to-Site SSTP VPN is flexible and can be set up using different protocols and configurations depending on your business needs.
- Scalable: Site-to-Site SSTP VPN is highly scalable, allowing you to add more locations to the network as your business grows.
Here is a step-by-step guide on how to configure Site-to-Site SSTP VPN between two MikroTik RouterOS:
Step 1: Configure IP Addresses
The first step is to configure IP addresses on both MikroTik RouterOS devices. Each device must have a unique IP address on the local network. Go to IP > Addresses and set the IP address and subnet mask for each device.
Step 2: Create IP Pools
Next, you need to create IP pools on both devices. IP pools are used to assign IP addresses to VPN clients. Go to IP > Pool and create a new pool with the desired IP range.
Step 3: Configure SSTP Server
Now, you need to configure the SSTP server on the first MikroTik RouterOS device. Go to PPP > SSTP Server and enable the SSTP server. Set the default profile to "default" and enable authentication if desired.
Step 4: Configure SSTP Client
The next step is to configure the SSTP client on the second MikroTik RouterOS device. Go to PPP > SSTP Client and create a new client configuration. Set the remote address to the IP address of the first MikroTik RouterOS device and select the desired authentication method.
Step 5: Configure Firewall Rules
Now, you need to configure firewall rules on both devices to allow traffic through the VPN tunnel. Go to IP > Firewall and create rules to allow traffic from the local network to the VPN connection and from the VPN connection to the local network.
Step 6: Test the Connection
The final step is to test the connection. Go to PPP > SSTP Client on the second MikroTik RouterOS device and click the Connect button. If the connection is successful, you should be able to access resources on the remote network as if they were on the local network.
And there you have it! With these simple steps, you can establish a secure and seamless network connection between two remote locations using Site-to-Site SSTP VPN configuration between two MikroTik RouterOS. So why wait? Start configuring your network today and experience the benefits of Site-to-Site SSTP VPN!
Post a Comment for "Configuring MikroTik Router For Site-to-Site VPN"